What are you looking for?

Get help straight from our team…

Melaure FAQ > How To Replace Filters > How do I install the showerhead?

How do I install the showerhead?

Last updated: May 28, 2026

This guide will help you install your Melaure Filtered Showerhead safely and correctly. Follow these simple steps to enjoy cleaner, healthier shower water in minutes.

Installation Steps

1. Turn Off Water Supply

Before starting, turn off the water supply to your shower to prevent any leaks or water damage.

  • Locate the shower valve
  • Turn clockwise to close
  • Test by turning on shower briefly

2. Remove Old Showerhead

Carefully unscrew your existing showerhead from the shower arm using your hands or an adjustable wrench.

  • Turn counterclockwise to loosen
  • Use a cloth to protect chrome finish
  • Set old showerhead aside

3. Clean the Shower Arm

Remove any old plumber's tape or debris from the shower arm threads to ensure a proper seal.

  • Wipe threads with a clean cloth
  • Remove old tape completely
  • Check for damage or corrosion

4. Apply Plumber's Tape

Wrap plumber's tape (Teflon tape) around the shower arm threads in a clockwise direction.

  • Wrap 3-4 times around threads
  • Always wrap clockwise
  • Press tape firmly into threads

5. Attach the Connector

Screw the included connector onto the shower arm, ensuring it's tight but not over-tightened.

  • Hand-tighten first
  • Use wrench for final quarter turn
  • Ensure connector is straight

6. Attach the Hose

Connect the flexible hose to the connector you just installed on the shower arm.

  • Align hose threads carefully
  • Turn clockwise to tighten
  • Hand-tighten is usually sufficient

7. Attach the Showerhead

Screw the Melaure Filtered Showerhead onto the other end of the flexible hose.

  • Ensure filter cartridge is installed
  • Tighten connection securely
  • Check alignment

8. Turn On Water Supply

Slowly turn the water supply back on and check all connections for leaks.

  • Turn valve counterclockwise
  • Open slowly to avoid pressure surge
  • Listen for unusual sounds

9. Adjust Showerhead Position

Position the showerhead at your desired angle and height using the adjustable bracket.

  • Adjust angle for comfort
  • Tighten bracket securely
  • Test movement range

10. Test the Showerhead

Run the shower for a few minutes to ensure proper water flow and check for any leaks.

  • Check all connection points
  • Verify water pressure is adequate
  • Enjoy your filtered shower!

Tips for a Smooth Installation

  • Always use plumber's tape to prevent leaks and ensure a watertight seal
  • Do not over-tighten connections as this can damage threads or crack plastic components
  • Check for leaks immediately after turning on water and tighten connections if needed
  • Keep a towel nearby to catch any drips during installation

What are you looking for?

Get help straight from our team…

Melaure FAQ > How do I install the showerhead? > How to Replace the Filter in Your Melaure Showerhead
The Filtered Showerhead™

How to Replace the Filter in Your Melaure Showerhead

Maintaining your Melaure Filtered Showerhead is essential for enjoying cleaner, healthier water. Replacing the filter regularly helps maintain optimal performance and ensures the best shower experience for your skin and hair.
Last updated: May 28, 2026

Why Replace the Filter?

Filters naturally collect impurities, chlorine, sediment, and contaminants over time. Replacing the filter helps maintain water quality, performance, and product lifespan. For optimal results, we recommend replacing your filter every 2-3 months depending on water quality and usage.

What You'll Need

  • New Melaure replacement filter
  • Soft towel or cloth
  • Optional rubber gloves

Step-by-Step Instructions

1 Turn Off the Water Supply
Before beginning, ensure the water is completely turned off to prevent any leaks or water flow during the replacement process.
2 Unscrew the Bottom of the Showerhead
Gently twist the bottom section of your Melaure showerhead counterclockwise to remove it. Use a soft cloth if you need extra grip.
3 Remove the Old Filter
Carefully pull out the used filter cartridge from the housing. Dispose of it properly according to local recycling guidelines.
4 Inspect the Housing
Check the filter housing for any debris or buildup. Wipe it clean with a damp cloth to ensure optimal performance.
5 Insert the New Filter
Take your new Melaure replacement filter and insert it into the housing, ensuring it sits securely and evenly.
6 Reattach the Bottom Section
Screw the bottom section back onto the showerhead by turning it clockwise. Make sure it's hand-tight but not over-tightened.
7 Test for Leaks
Turn the water supply back on and check for any leaks around the connection points. If you notice any drips, gently tighten the connection.
8 Enjoy Your Upgraded Shower Experience
Your Melaure showerhead is now ready to deliver fresh, filtered water. Enjoy cleaner, healthier showers with improved water quality!